Printable Version of Topic
Click here to view this topic in its original format
Breamster.com Forums _ Stadium Builder & Stadium Installer _ A step by step guide to building stadia
Posted by: a27 May 31 2004, 07:11 PM
I have an Idea,
Can the stadium makers who have been there and done that make a thread which gives a detailed step-by-step guide to building stadia for people who want to build stadia but can't do it yet?
Maybe it should be aimed at people with basic knowledge of Rhino or other 3D modelling software.
Posted by: PLuMe Jun 1 2004, 03:02 AM
I agree with you on that one. It is hard to start if you don't know where.
Also, the toutorials can help you only a bit, and yet there is many things that we might want to do that are not covered by the tutorials.
One helpfull item that is available is $chwenker's "stadionabmessungen.3dm" file, which has the size of the pitch and the addbords.
It's a good starting point, but there should be more to help out with basic stadium making.
I think that if any one has good ideas or tricks they should post them here.
One other item that might be very usefull would be a created 3dm file of a stadium that has been created in rhino and converted into sti. Therefore, people would be able to download this fille (just like stadionabmessungen.3dm) and see how sertan things were created/done in rhino. If anyone wants to volentire their created 3dm, please do so, if not, I will add my Parken once it's done and released.
Posted by: KP2k4 Jun 1 2004, 02:13 PM
The Parken one would be great 
Perhaps someone could offer a relatively simple generic one - like the little German stadium recently added to the site.
Posted by: a27 Jun 1 2004, 04:45 PM
| QUOTE (KP2k4 @ Jun 1 2004, 02:12 PM) |
| The Parken one would be great Perhaps someone could offer a relatively simple generic one - like the little German stadium recently added to the site. |
Yes. A simple generic one to start with. And then guides to creating other addons, details and customisations.
Posted by: a27 Jun 3 2004, 06:04 PM
Four days and not even a response from the bi guys. Maybe all that talk about "We WANT the stadium builders to use our technology" was a load of crap.
Posted by: Stotty Jun 3 2004, 06:14 PM
| QUOTE (a27 @ Jun 3 2004, 07:03 PM) |
| Four days and not even a response from the bi guys. Maybe all that talk about "We WANT the stadium builders to use our technology" was a load of crap. |
shut up of course they want people to build stads, its just hard to explain and it isn't possible to write a 200 page long tutorial
Posted by: a27 Jun 3 2004, 07:36 PM
| QUOTE (Stotty @ Jun 3 2004, 06:13 PM) |
shut up of course they want people to build stads, its just hard to explain and it isn't possible to write a 200 page long tutorial  |
GRRRRRRRRRRRRRRR!!!
Is it too much to ask for an acknowledgement of this idea?
Posted by: PLuMe Jun 3 2004, 08:01 PM
@ a27:
I agree with you 100%, however you must realize that the Stadium builders are not on everyday, and that people do have lives and work and they don't dedicate there entire life to building stadiums.
Be patient, I'm shure some of the big guys will respond soon.
PLuMe
PS: in a meanwhile take a look at this, it's a good pointer.
http://www.fifaecp.com/forums/index.php?showtopic=725
Posted by: Stotty Jun 3 2004, 09:00 PM
| QUOTE (a27 @ Jun 3 2004, 08:35 PM) | ||
GRRRRRRRRRRRRRRR!!! Is it too much to ask for an acknowledgement of this idea? |
i acknowledge your idea
Posted by: a27 Jun 4 2004, 05:12 AM
| QUOTE (Stotty @ Jun 3 2004, 08:59 PM) |
| [QUOTE=a27,Jun 3 2004, 08:35 PM] [QUOTE=Stotty,Jun 3 2004, 06:13 PM] i acknowledge your idea |
"I pardon you".
Stotty, are you one of the big stadium builders then?
Posted by: KP2k4 Jun 4 2004, 06:59 AM
I think he is but not sure - Schwenker's the first one that springs to mind, RealPete the second, and I believe there's others out there I can't think of, of whom Stotty must be one.
Posted by: rabcp Jun 4 2004, 02:42 PM
Im working on something similar over on the total club manager forums im a complete novice at sti stadium building but hopefully eventually this thread could help people
http://www.totalclubmanager.com/forum/viewtopic.php?t=24692
Posted by: a27 Jun 4 2004, 04:57 PM
| QUOTE (rabcp @ Jun 4 2004, 02:41 PM) |
| Im working on something similar over on the total club manager forums im a complete novice at sti stadium building but hopefully eventually this thread could help people http://www.totalclubmanager.com/forum/viewtopic.php?t=24692 |
A thousand blessings on your head, you're doing your bit to make the world a better place.
Tell us when it's complete will you?
Posted by: rabcp Jun 4 2004, 07:25 PM
| QUOTE (a27 @ Jun 4 2004, 04:56 PM) | ||
A thousand blessings on your head, you're doing your bit to make the world a better place. Tell us when it's complete will you? |
Well it could be a while but as soon as it complete i'll let you's all know
Posted by: KP2k4 Jun 4 2004, 07:58 PM
The thread is well worth keeping an eye on. He's designing a small stadium in Scotland as an example, and it looks as though that matches most people's ideas of what to do with their new-found prowess with sti design once they have it
Posted by: PLuMe Jun 6 2004, 06:12 PM
Ok, it seams like no one seems to want to help us out 
So I will try to help out with whatever I can. I'm no expert on stadium building but I will try with whatever knowladge I have, at the same time if any one wants to jump in and help out fell free.
BTW, I wont do a huge stadium to much work 
, so let's do a small stadia.
If anyone wants to host this file and textures let me know that way you can see the work in progres.
First, let's get a stadium templatre. There are few available, but lets get the new one from: http://perso.wanadoo.fr/lu.idf/Stadium%20template.zip
Now, where do we start???
Well first deside what u want to build first. I will start of by starting to build a concrete floor.
First you make a single mesh. How? Look here: http://www.totalclubmanager.com/forum/viewtopic.php?t=24692&start=12
Next you add texture to this mesh.
Select Objects Properties the green, blue and red cirle above Prospective view. Click on the arow by object and select Material. in assing by click on basic and go to Texture bitmap.
Chose your texture.
it should look like this:
Posted by: PLuMe Jun 6 2004, 06:28 PM
Next we are going to put that mesh on an engle.
Highlight the mesh and go to front view and press Rotate 2-d button
point to one end of the mesh (the first point wont move) and the second to the the other end, now move the end to a desired height.
Posted by: PLuMe Jun 6 2004, 06:42 PM
next I'm gona add a small base to the stadium and rais the floor.
create a new mesh, but this time in Right view
add texture, and move the mesh so it is at the begining of the angled mesh, move the angled mesh up anf it should look like this.
Posted by: PLuMe Jun 6 2004, 06:52 PM
next wee will add a fence.
Go to right view and create a new mesh and add texture. I will also add a bend to the fence by creating a small mesh(same steps as adding angle to the floor).
PS: you can add transperance to the textures by clicking Objects Properties & in transperancy I added 50.
Posted by: PLuMe Jun 6 2004, 07:04 PM
next in top view we will highlight all meshes made up to this point.
and we will start copying the same group of selected meshes to make a long stand.
click on copy 
point on the mesh and start copying till you are satisfied with the result.
do the entire stand
Posted by: PLuMe Jun 6 2004, 07:28 PM
now we will add something for people to sit on. I wont do seats cause everybody easle is doing them so insted I will add wooden benches.
make a new mesh that goes horizontaly and one that goes verticaly, add textures,
copy and pase till the entire stand will full of benches
lets see what it looks like so far.
so far so good! any coments? ideas? is this helping at all?
Please let me know
Posted by: PLuMe Jun 6 2004, 07:46 PM
now we will add a bend around the stadium and continue adding stands till the entire stadium is surounded.
first sellest the entire stand, and copy the stand making shure that the stands touch.
now, highlight the part of the stand that you will want to bend.
go to transform and select bend.
and bend to the desired outcome.
cut off any excess you dont want and repeat till the entire stadium is surounded.
you can also add flags and baners by creating new mesh and adding textures.
this is what we got so far
and
Posted by: PLuMe Jun 6 2004, 08:03 PM
Ok, that now we got the basic structure done who want's to continue?
Posted by: ludo Jun 6 2004, 08:05 PM
GREAT !!!! 
Posted by: Inas Jun 6 2004, 08:06 PM
| QUOTE (PLuMe @ Jun 6 2004, 08:02 PM) |
| Ok, that now we got the basic structure done who want's to continue? |
ok i will continue
Posted by: ludo Jun 6 2004, 08:19 PM
Don't forget to verify orientation of your texture...
Attached image(s)
Posted by: PLuMe Jun 6 2004, 08:21 PM
| QUOTE |
| Don't forget to verify orientation of your texture... |
tnx man, but can u explain a bit more in detail, what does it do?
Posted by: PLuMe Jun 6 2004, 08:22 PM
and bythe way show us the rest of the stadium
Posted by: ludo Jun 6 2004, 08:40 PM
Good
Attached image(s)
Posted by: ludo Jun 6 2004, 08:42 PM
Good
Attached image(s)
Posted by: ludo Jun 6 2004, 08:43 PM
bad
Attached image(s)
Posted by: rabcp Jun 6 2004, 10:38 PM
The stadiums looking good PLuMe is an actual clubs stadium or just a fantasy one? Theres some useful tips you've mentioned there too
Theres one part I cant figure out how do I leave a gap in the stand for an exit?
Posted by: ALVALADE XXI Jun 6 2004, 11:54 PM
| QUOTE (PLuMe @ Jun 6 2004, 06:11 PM) |
| Ok, it seams like no one seems to want to help us out So I will try to help out with whatever I can. I'm no expert on stadium building but I will try with whatever knowladge I have, at the same time if any one wants to jump in and help out fell free. BTW, I wont do a huge stadium to much work , so let's do a small stadia.If anyone wants to host this file and textures let me know that way you can see the work in progres. First, let's get a stadium templatre. There are few available, but lets get the new one from: http://perso.wanadoo.fr/lu.idf/Stadium%20template.zip Now, where do we start??? Well first deside what u want to build first. I will start of by starting to build a concrete floor. First you make a single mesh. How? Look here: http://www.totalclubmanager.com/forum/viewtopic.php?t=24692&start=12 Next you add texture to this mesh. Select Objects Properties the green, blue and red cirle above Prospective view. Click on the arow by object and select Material. in assing by click on basic and go to Texture bitmap. Chose your texture. it should look like this: |
Hello, PluMe, i'm going with you on this one. I'm gonna build Estádio dos Barreiros in Funchal ( CS Marítimo "home"). I'm just gonna follow all your steps, and try to build this small ground - 13000-. BTW, great work. I'm must say i learn alot with you in how to build (xml) stadiums in a similar thread in TCM foruns. So, i believe, that, if you achieve a good result here, i will do it too.
Posted by: ALVALADE XXI Jun 7 2004, 12:50 AM
Hey, PluMe, i know you are online, where do you get the textures you use in the begining ????
Posted by: PLuMe Jun 7 2004, 04:30 AM
@ ALVALADE XXI:
I have cheated and used a combination of programs to extract them from TCM & FIFA games .
I've used "bigGUI" to extract fsh files, then "Sonique FSH" to extract the BMP, then "Photoshop" to crop/edit/create, in some other instances I have created them from pictures.
If you need some textures let me know, maybe I can help you or others.
PLuMe
Posted by: RealPete Jun 7 2004, 09:49 AM
Nice topic Plume ! Congrats.
We do really help people though, infact most of my time goes up on helping others.
Everyone who dreams to make a stadium wants the help of Schwenker and me. Daily people popup on our MSN's to ask : "How can I make a stadium ?".
The thing that makes me sad that they mostly dont bother reading our tutorial.
The tutorial made by schwenker was a very big work. He invested hours and hours of his free time on it. He even translated it in German and English.
StadiumBuilding is not easy, its even hard !
It takes both talent AND determination to succeed.
I put up a rule for myself, I will only spend time on people who really try ! Who read our tutorials. For the moment I'm helping 3 promising stadiumbuilders on MSN. I'm sure the whole community will soon profit from those three talents. Its no use helping people who will never succeed. Thats my point of view anyway.
Again no bad word on your helpfull screenshots in here ! Its great you put them on our forum. I hope more people will build stadiums. Maybe one day we all have all stadiums in the most important leagues
Cheers mate,
RealPete
ECP-StadiumTeam
Posted by: a27 Jun 7 2004, 12:13 PM
| QUOTE (RealPete @ Jun 7 2004, 09:48 AM) |
| The thing that makes me sad that they mostly dont bother reading our tutorial. The tutorial made by schwenker was a very big work. He invested hours and hours of his free time on it. He even translated it in German and English. StadiumBuilding is not easy, its even hard ! It takes both talent AND determination to succeed. I put up a rule for myself, I will only spend time on people who really try ! Who read our tutorials. For the moment I'm helping 3 promising stadiumbuilders on MSN. I'm sure the whole community will soon profit from those three talents. Its no use helping people who will never succeed. Thats my point of view anyway. RealPete ECP-StadiumTeam |
I agree that no one should ask for help without at least going through the tutorials first. That'd save hours of your time repeating stuff that's already in the tutorial.
Posted by: PLuMe Jun 7 2004, 02:12 PM
Tnx Realpete for the complement but a27 started the topic
I agree with what you are saying & at the same time I do realize that you help out people with any questions that there is with building stadiums (and for that we thank you and Schwenker ).
But curently you 2 are the only ones that can answer any questions that we might have.
I'm happy to hear that there are 3 promising stadiumbuilders . Who are they? and congrats to them.
Take care
PLuMe
PS: @ a27:
| QUOTE |
| Four days and.... |
see
Posted by: PLuMe Jun 7 2004, 02:35 PM
@ ludo:
great picks............but what about the orientation of the texture?
what would hapen if the orientation/arrows was in the wrong way?
Posted by: ludo Jun 7 2004, 03:34 PM
"what would hapen if the orientation/arrows was in the wrong way? "
In the file 3ds, textures will be black or absent... As possible, always to steer fléches towards the centre of the game.
Posted by: PLuMe Jun 7 2004, 05:20 PM
let's continue with the basic building guides. This time we are going to try to answer a question asked by rabcp:
| QUOTE |
| Theres one part I cant figure out how do I leave a gap in the stand for an exit? |
However, before we start we must do one thing which we should have done before. LAYERS!!!
Layers are important and at the same time help us keep things orginized.
We should have layers for each parts of the stadiums that we build, ie: fance, addbords, seats, roof etc.
To create a layer go to the red, white & blue pie just obove the prospective view
this will open the layers box, asingh desired layers.
I will post the gap in the stands in the next post.
Posted by: PLuMe Jun 8 2004, 12:31 PM
Now that we have layers and we added desireid layers, hide the layers that will be in our way, such as benches, baners etc.
To do that, just click on the lightbulb in the layers box 
The next step is going to be on how to create an entrance.
The red line will represent where the players will run into the feild so we have to work around that area.
First delite whatever meshes you dont want around the entry point.
and start adding meshes in between the spaces.
and this is what I've got in the end
Posted by: Stotty Jun 8 2004, 03:47 PM
it might be nice, if you were to write this in a html file which we could put up for downloading 
Posted by: Hercules Jun 8 2004, 06:02 PM
maybe i can sort of include it in the next version of sb as an "alternative" tutorial section, or add it onto the one in there, if there is a new version of sb.
Only if u want to tho
Posted by: PLuMe Jun 9 2004, 04:20 AM
I have converted the small stadium to make a test to see how it looks in the game, here are the results:
before the whisle..................so far so good 
far end of the stand, looks good so far 
.
.
.
.
.
and ofcourse we ran into problems AGAIN!
WHAT THE F%*K IS GOING ON WITH THIS...........................
.................S%*T!!!
I GIVE UP!!!
Maybe it's my Stadium Builder? anyone has newer version other then 1.2
Posted by: RealPete Jun 9 2004, 07:47 AM
Sent me the 3DM file plume.
I'm quite sure its not SB but your 3DM.
Pete
Posted by: PLuMe Jun 9 2004, 12:55 PM
Its on it's way.
Tnx Pete.
PS: As far as I know I did everything right. But there's got to be something that I'mdoing wrong.
Posted by: ludo Jun 9 2004, 03:31 PM
PluMe:
Try with Rhino:
edit / select objects / duplcate objects ...
Posted by: ludo Jun 9 2004, 05:53 PM
Another way...
Have installed "Rhino 3.0 Service Release 3b SR3b" ?..
Posted by: thechulloran Jun 10 2004, 12:35 AM
PluMe does your PC slow down after a while when building your stadium, I dont do your method, when I try to build, it takes up all the resources up. It takes very long to zoom.
Posted by: CeeBee Jun 10 2004, 01:26 PM
Hou can you get meshes transparant, like fences.
Help !!
Posted by: PLuMe Jun 10 2004, 04:29 PM
| QUOTE (CeeBee @ Jun 10 2004, 01:25 PM) |
| Hou can you get meshes transparant, like fences. Help !! |
you can add transperance to the textures by clicking Objects Properties & in transperancy I added 50. however, this makes no diference, cause later on in stadium importing the transparency will be added in the fsh8 file.
Posted by: Hercules Jun 10 2004, 04:56 PM
nice to see you have 3 ecp internet explorer windows opened 
Posted by: PLuMe Jun 10 2004, 04:57 PM
lol
Posted by: PLuMe Jun 10 2004, 05:05 PM
@ scotty and hercules:
| QUOTE |
| it might be nice, if you were to write this in a html file which we could put up for downloading |
If I can get the problem resolved with the bomb efect thet I will, you can then download it or do whatever u wish. I will also incude the 3dm file as well
Posted by: CeeBee Jun 10 2004, 06:22 PM
The Fences are black and the background is white is that oke, or else gif me your texture of a fence. So i can see how it must be done
This is my project.
It's from a dutch second division team BVO Emmen.
On the adboards ( Doeland) there must come some fences
Posted by: PLuMe Jun 10 2004, 06:46 PM
That looks good
I'll send ya the texture in a bit (I'm at work now )
Posted by: PLuMe Jun 11 2004, 01:43 AM
CeeBee
here they are:
let me know if you need more or if you need them in diferent colours
PLuMe
Posted by: CeeBee Jun 11 2004, 08:45 AM
Thanks M8!
But can you help how to import it to FIFA, Now someone else is helping me to import it and i want to know how to do it 
Posted by: PLuMe Jun 11 2004, 02:25 PM
@ CeeBee:
I would love to help you out but I can't . Take a look at my earlier threads and see what hapens when I import them to fifa. Till I figure out what is wrong with my stadium builder or packer (rhino is aparently ok), I won't do any more.
Posted by: Stotty Jun 11 2004, 02:57 PM
did u make them textures yerself?
Posted by: PLuMe Jun 11 2004, 03:02 PM
which ones?
Posted by: Stotty Jun 11 2004, 03:35 PM
fences
Posted by: thechulloran Jun 12 2004, 06:46 AM
| QUOTE (PLuMe @ Jun 6 2004, 07:45 PM) |
| now we will add a bend around the stadium and continue adding stands till the entire stadium is surounded. first sellest the entire stand, and copy the stand making shure that the stands touch. now, highlight the part of the stand that you will want to bend. go to transform and select bend. and bend to the desired outcome. cut off any excess you dont want and repeat till the entire stadium is surounded. you can also add flags and baners by creating new mesh and adding textures. this is what we got so far and |
after you bend it and cut off the excess how do you make the next stand connect to the end of the bend, I can never do this perfectly, the last "line" at the end of the bend is not perfectly straight.
Posted by: blizarazu Jun 20 2004, 10:05 AM
Plume, the tutorial you are doing in this post is fantastic thakyou. But could you explain how the landscape and the buildings out of the stadium are done?
Thanks
Posted by: soccer*boy Jul 2 2004, 12:14 AM
| QUOTE (PLuMe @ Jun 1 2004, 03:01 AM) |
| I agree with you on that one. It is hard to start if you don't know where. Also, the toutorials can help you only a bit, and yet there is many things that we might want to do that are not covered by the tutorials. One helpfull item that is available is $chwenker's "stadionabmessungen.3dm" file, which has the size of the pitch and the addbords. It's a good starting point, but there should be more to help out with basic stadium making. I think that if any one has good ideas or tricks they should post them here. One other item that might be very usefull would be a created 3dm file of a stadium that has been created in rhino and converted into sti. Therefore, people would be able to download this fille (just like stadionabmessungen.3dm) and see how sertan things were created/done in rhino. If anyone wants to volentire their created 3dm, please do so, if not, I will add my Parken once it's done and released. |
| QUOTE |
One helpfull item that is available is $chwenker's "stadionabmessungen.3dm" file, which has the size of the pitch and the addbords. One helpfull item that is available is $chwenker's "stadionabmessungen.3dm" file, which has the size of the pitch and the addbords. |
plz tell me wherecan i get this file?
and can anyone give us some textures?
Posted by: soccer*boy Jul 2 2004, 12:15 AM
| QUOTE (PLuMe @ Jun 1 2004, 03:01 AM) |
| One helpfull item that is available is $chwenker's "stadionabmessungen.3dm" file, which has the size of the pitch and the addbords. |
plz tell me wherecan i get this file?
and can anyone give us some textures?
Posted by: $chwenker Jul 2 2004, 12:18 PM
http://www.mad-monkey.de/schwenker/sonstg/stadionabmessungen.3dm
Posted by: PLuMe Jul 5 2004, 02:12 PM
| QUOTE (soccer*boy @ Jul 2 2004, 12:14 AM) | ||
plz tell me wherecan i get this file? and can anyone give us some textures? |
What textures do you want?
Posted by: ric14 Jul 12 2004, 03:02 AM
helo,iam new here at fifa ecp..and i need some help if any1 can help me..?
i just build this stad:
but the problem the stad is done..and i want to imported to the game to tested..but i dont know how..i tried reading the tutorial but i coulnt understand thta much..can any please help me put in to the game? or adding crowds?
plz???
my email is
ckoenag296@aol.com
and my msn mensager is
ricardoquadros14@hotmail.com
plz help.!!!
Posted by: S-Jelle Oct 20 2004, 02:21 PM
Hello
I've a problem, it's an old topic i know but i've a question. I make the stadium of de Graafschap, a dutch club out Doetinchem, but i've problems with the square. I've seen how to make a oval, but not a rounded square... I'll show a picture of the stadium, so i will know how to make a square like this?
Greetings from me
Posted by: a27 Apr 12 2005, 03:28 PM
Hey,
10 months later, I'm back.
It's good to see that some good came out of this topic.
Thanks guys!!!
Posted by: marciocxs Jul 31 2005, 07:03 AM
hey people!
the links:
http://perso.wanadoo.fr/lu.idf/Stadium%20template.zip
http://www.totalclubmanager.com/forum/view...=24692&start=12
are died ...
guys if possible to build the stadium here?
http://www.sercaxiasdosul.com.br/_images/wallpaper/5_1024.jpg
pleease! not more details! its very easy!
in Brazil team for secound division
sorry for my bad english
Posted by: andywhat Aug 8 2005, 05:14 PM
So I will try to help out with whatever I can. I'm no expert on stadium building but I will try with whatever knowladge I have, at the same time if any one wants to jump in and help out fell free.
BTW, I wont do a huge stadium to much work
, so let's do a small stadia.If anyone wants to host this file and textures let me know that way you can see the work in progres.
First, let's get a stadium templatre. There are few available, but lets get the new one from: http://perso.wanadoo.fr/lu.idf/Stadium%20template.zip
Now, where do we start???
Well first deside what u want to build first. I will start of by starting to build a concrete floor.
First you make a single mesh. How? Look here: http://www.totalclubmanager.com/forum/viewtopic.php?t=24692&start=12
Next you add texture to this mesh.
Select Objects Properties the green, blue and red cirle above Prospective view. Click on the arow by object and select Material. in assing by click on basic and go to Texture bitmap.
Chose your texture.
it should look like this:
The link for the actual soccer field is not active anymore can anyone upload it again? Please?
Posted by: Giuseppe1000 Aug 9 2005, 11:57 AM
www.fifainternational.com
Posted by: marciocxs Aug 25 2005, 06:28 PM
www.fifainternational.com
not open here ....
Posted by: Daichi Aug 26 2005, 12:40 AM
Please, uploado to www.rapidshare.de!
Posted by: ludo Aug 29 2005, 03:21 PM
http://perso.wanadoo.fr/lu.idf/Stadium%20template.zip
is good now...
http://perso.wanadoo.fr/lu.idf/
Posted by: Daichi Sep 1 2005, 07:38 PM
And where can I download the file to edit it?
Posted by: OlliX Sep 2 2005, 11:39 AM
Hi....
I am new here and my english is not the best...
I am trying to create the Stadium of VfB Luebeck and have some Problems.
At first after having done the main work on the main stand I wanted to save it to 3ds, but every time I do it rhino crashes to main window.
My second question is about groups: are they allowed or is there another method to combine some meshes with another (I mean all concrete parts e.g.)
Ok, an here is a first pic of my work...
mfg
OlliX
Attached image(s)
Posted by: South^Front-d4 Apr 25 2006, 08:18 AM
Nice!
Posted by: RedBull319 Apr 25 2006, 12:04 PM
i would but I have no idea how to import the finished product into FIFA06. If someone else could do that, i could maybe do the rhino part
Posted by: Gavra Apr 25 2006, 04:00 PM
I can convert to fifa 06.
Does anyone know how to edit lights on stadium???
Posted by: South^Front-d4 Apr 25 2006, 04:08 PM
You must have last version of OIFTool
Posted by: nemmi Oct 9 2006, 08:42 AM
This link http://www.totalclubmanager.com/forum/view...=24692&start=12 is dead.Can i see somewhere else how to build a single mesh??
Posted by: nemmi Oct 9 2006, 09:20 PM
Sorry not a mesh i was not thinking but where can i get a seat texture????
Posted by: Dusya84 Oct 10 2006, 09:58 AM
take it from other stadium
Posted by: madk0w Oct 14 2006, 03:35 AM
I'm giving this stadium building a go. All I have any clue at is doing the Rhino 3d bit. Once I get the meshes up, I'll need a point in the right direction for textures and such. As per usual, help would be appreciated with this endeavour. I'd like to see every team in the Premiership represented with a stadium. Heck, even some Coca Cola Championship ones would be nice as well.
Posted by: $chwenker Oct 14 2006, 12:36 PM
Hi !
Best you get the textures from sites like www.stadionwelt.de or www.worldstadiums.com.
Make the textures out of photos of the stadium, it's much better than using standard textures.
You can also use Google Image search - of course, the bigger the images are the better they are for making textures from them
Cheers
Schwenker
Posted by: Klaudioz Nov 19 2006, 03:39 PM
someone can re-upload the file:
http://www.mad-monkey.de/schwenker/sonstg/stadionabmessungen.3dm
thanks
Posted by: kenny_fcb Nov 25 2006, 12:39 PM
Hi,
Can someone upload the cement texture for me? I've tried to make it myself but it was verry bad...
Sorry for my bad english...
Posted by: Dusya84 Nov 25 2006, 02:20 PM
try this
http://images.google.com.ua/images?hl=ru&q=cement+texture&btnG=%D0%9F%D0%BE%D0%B8%D1%81%D0%BA+%D0%BA%D0%B0%D1%80%D1%82%D0%B8%D0%BD%D0%BE%D0%BA
Posted by: South^Front-d4 Nov 26 2006, 07:53 AM
http://www.mayang.com/textures/ 
Powered by Invision Power Board ()
© Invision Power Services ()